Allergen cross-contact is when a residue or trace amount of an allergen unintentionally crosses over into a product that doesn’t have that specific allergen. Cross-contact is generally the result of environmental exposure during food processing or handling. It can occur when multiple foods are manufactured on the same processing line, through the misuse of rework, a result of ineffective cleaning or from employee practices.
Food manufacturers need to evaluate their operations to recognize and develop plans to control undeclared allergens. The first step in developing an allergen control plan would be to conduct a risk assessment to understand what allergenic ingredients and foods exist in the facility and where they are introduced into the process. Next, once you have identified where allergen hazards exist in your facility you need to implement controls at those steps to reduce or eliminate the allergen hazard. Your allergen control plan must include training of personnel from management, purchasing, and maintenance to production line employees. Review of the allergen control plan must be done whenever a new ingredient is added, when processes or protocols are changed, or when new products or equipment are introduced into the facility. Understanding the potential consequences to a consumer with a food allergy will reinforce the importance of following the proper control procedures. It will also be important to have an ongoing monitoring system to verify that all control points are being consistently met.
The following are areas where allergen hazards may occur and where controls can be implemented.
Product Research and Development/Engineering and System Design
- Consider the allergenic nature of the ingredient, is there a non-allergenic ingredient that could be used instead?
- Avoid using allergenic ingredients in such low amounts when they have no or minimal functional effect in the finished product.
- Design the product flow so that allergenic ingredients are added at the end of a production line thereby limiting equipment exposure to allergens and potential allergen cross-contact.
- Design and install equipment for easier cleaning, inspection, and maintenance.
- Design production lines to isolate allergen addition points, dedicate re-feed systems, ensure product containment and eliminate crossover of conveyor lines
- Design traffic patterns and airflow in the production facility to prevent allergen cross-contact.
- Dedicate production systems, lines, and employees to handle only allergen or non-allergen products.
Raw Material/Ingredient Purchasing, Transportation, and Storage
- Ensure suppliers have a documented and implemented allergen control plan.
- Require letters from suppliers that guarantee the ingredients you purchase do not contain undeclared allergens and that they will notify you of any changes to the allergen status of the ingredients.
- Know the ingredients, consider processing aids and rework that goes into the product.
- Don't purchase reconditioned ingredients or oils.
- Ensure proper sanitation or dedicated use in transportation of bulk ingredients or shipping containers that are re-used.
- Review specifications or ingredient statements before substituting raw materials.
- Store allergenic ingredients separately to prevent cross-contact.
- Store like allergens together and do not store allergens over non-allergen-containing products.
- Clean up all spills immediately to prevent potential allergen cross-contact.
- Clearly label raw materials to indicate they contain an allergen.
Production and Scheduling
- Dedicate production systems, and use separate lines, equipment, rooms, or even facilities where necessary.
- Dedicate tools, containers, and utensils and clearly mark them or use color coding to identify allergenic ingredients and/or products.
- Restrict personnel working on processing lines containing allergenic ingredients from working on non-allergenic production lines.
- Minimize the reuse of processing and/or cooking media such as water or oil. If cooking media is reused, test to validate there is no cross-contact for non-allergen products.
- Production scheduling: make products with allergenic ingredients all at one time or at the end of a production run, then perform a complete clean-up before running other products.
- Develop an allergen matrix or changeover grid to identify what practices or production changes need to be made between flavors or products (spray down or full clean up).
- Do not allow the reuse of single service articles such as tray liners.
- Provide lockouts on equipment that uses or supplies allergenic ingredients.
- Protect work-in-process from cross-contact with other products on adjacent carts, conveyors, etc.
- When sampling the product in-process, be certain that the sampling device is sanitized appropriately between products.
- Allow adequate clean-up time between production runs.
Use of Rework
- Have a documented rework plan including designated uses for re-work, maintaining usage records, and other rework controls to track allergens through the system into the finished product.
- Only rework allergenic containing ingredients or products into the same formulation – “like into like” or “exact into exact”
- Clearly label all rework; use of color tags, containers, plastic liners, or barcoding to identify allergen ingredient-containing products.
- Ensure that re-feed systems are properly contained.
Labeling and Packaging Materials
- Ensure label approval processes are in place for new products or changes to current products.
- Check labels on incoming ingredients. A supplier may have sent the wrong product or used the wrong label.
- Verify label accuracy, and update to reflect the current formula.
- Ensure compliance with labeling regulations: Food Allergen Labeling and Consumer Protection Act of 2004 (FALCPA) | FDA generally requires declaration of all ingredients; the exception to this include spices, some colors, flavors, and processing aids and incidental additives at insignificant levels or that have no technical function or effect. If an incidental additive or processing aid is derived from an allergenic ingredient, it must be included on the label.
- Limit the use of precautionary labeling (such as 'may contain') in lieu of good manufacturing practices. Do not list ingredients that are not in the formula.
- Manage excess packaging materials. Remove outdated containers or labels from the plant.
- Monitor, document, and verify the correct label at all changeovers as they occur.
- Consider cross-contact potential on packaging equipment.
- For packaged, unlabeled products (such as individual granola bars), develop systems, to assure that the correct product is packaged into the containers with ingredient declarations.
- Use a lot numbering system on raw materials through to finished products to ensure recovery of all products in the event of a recall.
- Conduct traceability exercises such as a mock recall to verify product traceability.
Sanitation
- Have standardized procedures for sanitation operations (SSOP's) and ensure employees are properly trained to follow these procedures.
- Use appropriate cleaning methods (wipe/scrape, vacuum, soap and water wash, proper chemicals).
- Have proper equipment and tools available.
- Focus on hard-to-clean areas - valves, pumps, dead spots.
- Ensure adequate lighting in the proper locations (including flashlights to check inside equipment).
- Move equipment as necessary to make it easily accessible for cleaning.
- Disassemble equipment where and when necessary.
- Focus on results, not necessarily the time or process.
- Evaluate sanitation effectiveness, validation of cleaning by visual inspection, bioluminescence testing, or enzyme-linked immunoassay (ELISA) testing.
- Ensure proper storage of clean items.
- Ensure that maintenance tools used in raw and finished product areas are not potential sources of cross-contamination (consider color coding for specific areas or products, or cleaning procedures to reduce contamination).
- Specify employee practices - hand washing at appropriate times (for example after handling a product that contains allergens, such as peanuts); proper hand washing procedures; clean clothing/aprons.
Training and Education
- Provide training on allergen awareness and control for all employees at all levels of the company.
- Training points to include: defining allergens, consequences to sensitive people, importance of allergen control, most common areas where problems occur, and control measures.
- Provide specific documented training to employees as dictated by their job responsibilities. Such as employees responsible for product labeling at product changeovers on the production line, sanitation/allergen cleaning verification activities, and label verification of incoming packaging material.
Food manufacturers need to evaluate their operations to recognize and develop plans to control undeclared allergens. The first step in developing an allergen control plan would be to conduct a risk assessment to understand what allergenic ingredients and foods exist in the facility and where they are introduced into the process. Next, once you have identified where allergen hazards exist in your facility you need to implement controls at those steps to reduce or eliminate the allergen hazard. Your allergen control plan must include training of personnel from management, purchasing, and maintenance to production line employees. Review of the allergen control plan must be done whenever a new ingredient is added, when processes or protocols are changed, or when new products or equipment are introduced into the facility. Understanding the potential consequences to a consumer with a food allergy will reinforce the importance of following the proper control procedures. It will also be important to have an ongoing monitoring system to verify that all control points are being consistently met.
The following are areas where allergen hazards may occur and where controls can be implemented.
Product Research and Development/Engineering and System Design
- Consider the allergenic nature of the ingredient, is there a non-allergenic ingredient that could be used instead?
- Avoid using allergenic ingredients in such low amounts when they have no or minimal functional effect in the finished product.
- Design the product flow so that allergenic ingredients are added at the end of a production line thereby limiting equipment exposure to allergens and potential allergen cross-contact.
- Design and install equipment for easier cleaning, inspection, and maintenance.
- Design production lines to isolate allergen addition points, dedicate re-feed systems, ensure product containment and eliminate crossover of conveyor lines
- Design traffic patterns and airflow in the production facility to prevent allergen cross-contact.
- Dedicate production systems, lines, and employees to handle only allergen or non-allergen products.
Raw Material/Ingredient Purchasing, Transportation, and Storage
- Ensure suppliers have a documented and implemented allergen control plan.
- Require letters from suppliers that guarantee the ingredients you purchase do not contain undeclared allergens and that they will notify you of any changes to the allergen status of the ingredients.
- Know the ingredients, consider processing aids and rework that goes into the product.
- Don't purchase reconditioned ingredients or oils.
- Ensure proper sanitation or dedicated use in transportation of bulk ingredients or shipping containers that are re-used.
- Review specifications or ingredient statements before substituting raw materials.
- Store allergenic ingredients separately to prevent cross-contact.
- Store like allergens together and do not store allergens over non-allergen-containing products.
- Clean up all spills immediately to prevent potential allergen cross-contact.
- Clearly label raw materials to indicate they contain an allergen.
Production and Scheduling
- Dedicate production systems, and use separate lines, equipment, rooms, or even facilities where necessary.
- Dedicate tools, containers, and utensils and clearly mark them or use color coding to identify allergenic ingredients and/or products.
- Restrict personnel working on processing lines containing allergenic ingredients from working on non-allergenic production lines.
- Minimize the reuse of processing and/or cooking media such as water or oil. If cooking media is reused, test to validate there is no cross-contact for non-allergen products.
- Production scheduling: make products with allergenic ingredients all at one time or at the end of a production run, then perform a complete clean-up before running other products.
- Develop an allergen matrix or changeover grid to identify what practices or production changes need to be made between flavors or products (spray down or full clean up).
- Do not allow the reuse of single service articles such as tray liners.
- Provide lockouts on equipment that uses or supplies allergenic ingredients.
- Protect work-in-process from cross-contact with other products on adjacent carts, conveyors, etc.
- When sampling the product in-process, be certain that the sampling device is sanitized appropriately between products.
- Allow adequate clean-up time between production runs.
Use of Rework
- Have a documented rework plan including designated uses for re-work, maintaining usage records, and other rework controls to track allergens through the system into the finished product.
- Only rework allergenic containing ingredients or products into the same formulation – “like into like” or “exact into exact”
- Clearly label all rework; use of color tags, containers, plastic liners, or barcoding to identify allergen ingredient-containing products.
- Ensure that re-feed systems are properly contained.
Labeling and Packaging Materials
- Ensure label approval processes are in place for new products or changes to current products.
- Check labels on incoming ingredients. A supplier may have sent the wrong product or used the wrong label.
- Verify label accuracy, and update to reflect the current formula.
- Ensure compliance with labeling regulations: Food Allergen Labeling and Consumer Protection Act of 2004 (FALCPA) | FDA generally requires declaration of all ingredients; the exception to this include spices, some colors, flavors, and processing aids and incidental additives at insignificant levels or that have no technical function or effect. If an incidental additive or processing aid is derived from an allergenic ingredient, it must be included on the label.
- Limit the use of precautionary labeling (such as 'may contain') in lieu of good manufacturing practices. Do not list ingredients that are not in the formula.
- Manage excess packaging materials. Remove outdated containers or labels from the plant.
- Monitor, document, and verify the correct label at all changeovers as they occur.
- Consider cross-contact potential on packaging equipment.
- For packaged, unlabeled products (such as individual granola bars), develop systems, to assure that the correct product is packaged into the containers with ingredient declarations.
- Use a lot numbering system on raw materials through to finished products to ensure recovery of all products in the event of a recall.
- Conduct traceability exercises such as a mock recall to verify product traceability.
Sanitation
- Have standardized procedures for sanitation operations (SSOP's) and ensure employees are properly trained to follow these procedures.
- Use appropriate cleaning methods (wipe/scrape, vacuum, soap and water wash, proper chemicals).
- Have proper equipment and tools available.
- Focus on hard-to-clean areas - valves, pumps, dead spots.
- Ensure adequate lighting in the proper locations (including flashlights to check inside equipment).
- Move equipment as necessary to make it easily accessible for cleaning.
- Disassemble equipment where and when necessary.
- Focus on results, not necessarily the time or process.
- Evaluate sanitation effectiveness, validation of cleaning by visual inspection, bioluminescence testing, or enzyme-linked immunoassay (ELISA) testing.
- Ensure proper storage of clean items.
- Ensure that maintenance tools used in raw and finished product areas are not potential sources of cross-contamination (consider color coding for specific areas or products, or cleaning procedures to reduce contamination).
- Specify employee practices - hand washing at appropriate times (for example after handling a product that contains allergens, such as peanuts); proper hand washing procedures; clean clothing/aprons.
Training and Education
- Provide training on allergen awareness and control for all employees at all levels of the company.
- Training points to include: defining allergens, consequences to sensitive people, importance of allergen control, most common areas where problems occur, and control measures.
- Provide specific documented training to employees as dictated by their job responsibilities. Such as employees responsible for product labeling at product changeovers on the production line, sanitation/allergen cleaning verification activities, and label verification of incoming packaging material.
The United States Food and Drug Administration (FDA) has identified eight foods (or food ingredients) that are responsible for 90 percent of food allergic reactions. Those foods are milk, eggs, fish, crustacean shellfish, tree nuts, peanuts, wheat, and soybeans. On January 1st of 2023, sesame will become the ninth major food allergen recognized by the FDA.
Yes. The leading cause of food recalls in recent years is due to the presence of undeclared allergens. Undeclared allergens end up in food due to two main reasons, mislabeling of the finished product and allergen cross-contact. Mislabeling occurs when a finished product label does not list an allergen in the ingredient statement when, in fact, the product contains an allergen. This can occur due to using the wrong label during packaging or not including allergenic ingredients in the finished product ingredient statement.
Allergen cross-contact is when a residue or trace amount of an allergen unintentionally crosses over into a product that doesn’t have that specific allergen. Cross-contact is generally the result of environmental exposure during food processing or handling. It can occur when multiple foods are manufactured on the same processing line, through the misuse of rework, a result of ineffective cleaning or from employee practices.
Food manufacturers need to evaluate their operations to recognize and develop plans to control undeclared allergens. The first step in developing an allergen control plan would be to conduct a risk assessment to understand what allergenic ingredients and foods exist in the facility and where they are introduced into the process. Next, once you have identified where allergen hazards exist in your facility you need to implement controls at those steps to reduce or eliminate the allergen hazard. Your allergen control plan must include training of personnel from management, purchasing, and maintenance to production line employees. Review of the allergen control plan must be done whenever a new ingredient is added, when processes or protocols are changed, or when new products or equipment are introduced into the facility. Understanding the potential consequences to a consumer with a food allergy will reinforce the importance of following the proper control procedures. It will also be important to have an ongoing monitoring system to verify that all control points are being consistently met.
The following are areas where allergen hazards may occur and where controls can be implemented.
Product Research and Development/Engineering and System Design
- Consider the allergenic nature of the ingredient, is there a non-allergenic ingredient that could be used instead?
- Avoid using allergenic ingredients in such low amounts when they have no or minimal functional effect in the finished product.
- Design the product flow so that allergenic ingredients are added at the end of a production line thereby limiting equipment exposure to allergens and potential allergen cross-contact.
- Design and install equipment for easier cleaning, inspection, and maintenance.
- Design production lines to isolate allergen addition points, dedicate re-feed systems, ensure product containment and eliminate crossover of conveyor lines
- Design traffic patterns and airflow in the production facility to prevent allergen cross-contact.
- Dedicate production systems, lines, and employees to handle only allergen or non-allergen products.
Raw Material/Ingredient Purchasing, Transportation, and Storage
- Ensure suppliers have a documented and implemented allergen control plan.
- Require letters from suppliers that guarantee the ingredients you purchase do not contain undeclared allergens and that they will notify you of any changes to the allergen status of the ingredients.
- Know the ingredients, consider processing aids and rework that goes into the product.
- Don't purchase reconditioned ingredients or oils.
- Ensure proper sanitation or dedicated use in transportation of bulk ingredients or shipping containers that are re-used.
- Review specifications or ingredient statements before substituting raw materials.
- Store allergenic ingredients separately to prevent cross-contact.
- Store like allergens together and do not store allergens over non-allergen-containing products.
- Clean up all spills immediately to prevent potential allergen cross-contact.
- Clearly label raw materials to indicate they contain an allergen.
Production and Scheduling
- Dedicate production systems, and use separate lines, equipment, rooms, or even facilities where necessary.
- Dedicate tools, containers, and utensils and clearly mark them or use color coding to identify allergenic ingredients and/or products.
- Restrict personnel working on processing lines containing allergenic ingredients from working on non-allergenic production lines.
- Minimize the reuse of processing and/or cooking media such as water or oil. If cooking media is reused, test to validate there is no cross-contact for non-allergen products.
- Production scheduling: make products with allergenic ingredients all at one time or at the end of a production run, then perform a complete clean-up before running other products.
- Develop an allergen matrix or changeover grid to identify what practices or production changes need to be made between flavors or products (spray down or full clean up).
- Do not allow the reuse of single service articles such as tray liners.
- Provide lockouts on equipment that uses or supplies allergenic ingredients.
- Protect work-in-process from cross-contact with other products on adjacent carts, conveyors, etc.
- When sampling the product in-process, be certain that the sampling device is sanitized appropriately between products.
- Allow adequate clean-up time between production runs.
Use of Rework
- Have a documented rework plan including designated uses for re-work, maintaining usage records, and other rework controls to track allergens through the system into the finished product.
- Only rework allergenic containing ingredients or products into the same formulation – “like into like” or “exact into exact”
- Clearly label all rework; use of color tags, containers, plastic liners, or barcoding to identify allergen ingredient-containing products.
- Ensure that re-feed systems are properly contained.
Labeling and Packaging Materials
- Ensure label approval processes are in place for new products or changes to current products.
- Check labels on incoming ingredients. A supplier may have sent the wrong product or used the wrong label.
- Verify label accuracy, and update to reflect the current formula.
- Ensure compliance with labeling regulations: Food Allergen Labeling and Consumer Protection Act of 2004 (FALCPA) | FDA generally requires declaration of all ingredients; the exception to this include spices, some colors, flavors, and processing aids and incidental additives at insignificant levels or that have no technical function or effect. If an incidental additive or processing aid is derived from an allergenic ingredient, it must be included on the label.
- Limit the use of precautionary labeling (such as 'may contain') in lieu of good manufacturing practices. Do not list ingredients that are not in the formula.
- Manage excess packaging materials. Remove outdated containers or labels from the plant.
- Monitor, document, and verify the correct label at all changeovers as they occur.
- Consider cross-contact potential on packaging equipment.
- For packaged, unlabeled products (such as individual granola bars), develop systems, to assure that the correct product is packaged into the containers with ingredient declarations.
- Use a lot numbering system on raw materials through to finished products to ensure recovery of all products in the event of a recall.
- Conduct traceability exercises such as a mock recall to verify product traceability.
Sanitation
- Have standardized procedures for sanitation operations (SSOP's) and ensure employees are properly trained to follow these procedures.
- Use appropriate cleaning methods (wipe/scrape, vacuum, soap and water wash, proper chemicals).
- Have proper equipment and tools available.
- Focus on hard-to-clean areas - valves, pumps, dead spots.
- Ensure adequate lighting in the proper locations (including flashlights to check inside equipment).
- Move equipment as necessary to make it easily accessible for cleaning.
- Disassemble equipment where and when necessary.
- Focus on results, not necessarily the time or process.
- Evaluate sanitation effectiveness, validation of cleaning by visual inspection, bioluminescence testing, or enzyme-linked immunoassay (ELISA) testing.
- Ensure proper storage of clean items.
- Ensure that maintenance tools used in raw and finished product areas are not potential sources of cross-contamination (consider color coding for specific areas or products, or cleaning procedures to reduce contamination).
- Specify employee practices - hand washing at appropriate times (for example after handling a product that contains allergens, such as peanuts); proper hand washing procedures; clean clothing/aprons.
Training and Education
- Provide training on allergen awareness and control for all employees at all levels of the company.
- Training points to include: defining allergens, consequences to sensitive people, importance of allergen control, most common areas where problems occur, and control measures.
- Provide specific documented training to employees as dictated by their job responsibilities. Such as employees responsible for product labeling at product changeovers on the production line, sanitation/allergen cleaning verification activities, and label verification of incoming packaging material.
Prepackaged Foods: Per the Minnesota Food Code, "Packaged" means bottled, canned, cartoned, bagged, or wrapped, whether packaged in a food establishment or a food processing plant. Packaged does not include food delivered to a consumer by a food business employee, upon consumer request, that is wrapped or placed in a carry-out container to protect the food during delivery to the consumer.
Bulk Foods: Per Minnesota Statutes, "Bulk food" means unpackaged and unwrapped food in aggregate containers from which quantities are withdrawn by the consumer, excluding fresh fruits, fresh vegetables, nuts in the shell, and food in salad bars.
Approved Source: Per the Minnesota Food Code, "Approved" means acceptable to the regulatory authority based on a determination of conformity with principles, practices, and generally recognized standards that protect public health. A seller must purchase food from commercial suppliers under regulatory control which may include local, regional, or international growers, food manufacturing plants, food suppliers or distributors.
Food Additive: Title 21 of the Federal Food, Drug & Cosmetic Act defines “additive” as a substance with which the intended use results or may reasonably be expected to result, directly or indirectly, in it becoming a component or otherwise affecting the characteristics of any food. More information can be found in Title 21 of the Federal Food, Drug & Cosmetic Act for exceptions and further guidelines.
Allergen: Currently, there are eight major foods that account for 90 percent of all food allergies. They are: peanuts, tree nuts (almonds, pecans, walnuts, etc.) crustacean shellfish (crab, lobster and shrimp), fish, eggs, milk, soy, and wheat.
Consumer Advisory: Minnesota Statutes require food establishments to use a consumer advisory whenever raw or undercooked animal food is served or sold raw, undercooked, or without further processing to eliminate pathogens. Your consumer advisory must include a disclosure and a reminder. A disclosure is a written statement that clearly identifies the raw or undercooked animal food or item that contains a raw or undercooked ingredient. A reminder is a written statement that eating raw or undercooked food is associated with increased risk of foodborne illness. The reminder must include an asterisk by the item and a footnote.
Reduced Oxygen Packaging: Per the Minnesota Food Code, the package must be prominently and conspicuously labeled on the principal display panel in bold type on a contrasting background, with instructions to:
- maintain the food at 41 degrees F (5 degrees C) or below
- discard the food if within 30 calendar days of its packaging it is not served for on-premises consumption, or consumed if served or sold for off-premises consumption
- limits the refrigerated shelf life to no more than 30 calendar days from packaging to consumption, except the time the product is maintained frozen, or the original manufacturer's "sell by" or "use by" date, whichever occurs first
Prepackaged Foods: Per the Minnesota Food Code, "Packaged" means bottled, canned, cartoned, bagged, or wrapped, whether packaged in a food establishment or a food processing plant. Packaged does not include food delivered to a consumer by a food business employee, upon consumer request, that is wrapped or placed in a carry-out container to protect the food during delivery to the consumer.
Bulk Foods: Per Minnesota Statutes, "Bulk food" means unpackaged and unwrapped food in aggregate containers from which quantities are withdrawn by the consumer, excluding fresh fruits, fresh vegetables, nuts in the shell, and food in salad bars.
Approved Source: Per the Minnesota Food Code, "Approved" means acceptable to the regulatory authority based on a determination of conformity with principles, practices, and generally recognized standards that protect public health. A seller must purchase food from commercial suppliers under regulatory control which may include local, regional, or international growers, food manufacturing plants, food suppliers or distributors.
Food Additive: Title 21 of the Federal Food, Drug & Cosmetic Act defines “additive” as a substance with which the intended use results or may reasonably be expected to result, directly or indirectly, in it becoming a component or otherwise affecting the characteristics of any food. More information can be found in Title 21 of the Federal Food, Drug & Cosmetic Act for exceptions and further guidelines.
Allergen: Currently, there are eight major foods that account for 90 percent of all food allergies. They are: peanuts, tree nuts (almonds, pecans, walnuts, etc.) crustacean shellfish (crab, lobster and shrimp), fish, eggs, milk, soy, and wheat.
Consumer Advisory: Minnesota Statutes require food establishments to use a consumer advisory whenever raw or undercooked animal food is served or sold raw, undercooked, or without further processing to eliminate pathogens. Your consumer advisory must include a disclosure and a reminder. A disclosure is a written statement that clearly identifies the raw or undercooked animal food or item that contains a raw or undercooked ingredient. A reminder is a written statement that eating raw or undercooked food is associated with increased risk of foodborne illness. The reminder must include an asterisk by the item and a footnote.
Reduced Oxygen Packaging: Per the Minnesota Food Code, the package must be prominently and conspicuously labeled on the principal display panel in bold type on a contrasting background, with instructions to:
- maintain the food at 41 degrees F (5 degrees C) or below
- discard the food if within 30 calendar days of its packaging it is not served for on-premises consumption, or consumed if served or sold for off-premises consumption
- limits the refrigerated shelf life to no more than 30 calendar days from packaging to consumption, except the time the product is maintained frozen, or the original manufacturer's "sell by" or "use by" date, whichever occurs first
These instructions apply to liquid and comb honey only, not processed honey, which has all the requirements of processed food.
Principal Display Panel
The principal display panel must be large enough to clearly accommodate all required label information without crowding or obscuring designs. All information on the label must be prominent and conspicuous, but in no case may the letters and numbers be less than 1/16 inch high.
Product identity must be on the label, i.e., honey. The declaration of the floral source of honey on the label is not required. However, the name of the plant or blossom can be included if the information to support the conclusion that the plant or blossom designated on the label is the main floral source of the honey. Names such as “Clover Honey” or “Wildflower Honey” are acceptable.
The net quantity of contents must be expressed in terms of weight or measure. This declaration of contents must be expressed both in ounces and full unit if one to four pounds, or one pint to one gallon. The metric equivalent is sometimes required. The declaration must be in the lower one-third of the label separated from all other print. If the weight is more than one pound, fractions of a pound are expressed as a decimal, e.g., 1 1/2 pounds is 1.5 lb. The declaration must be in letters and numbers in a type and size relative to the area of the label panel of the package as follows:
- Not less than 1/16 inch in height for a label of five square inches or less.
- Not less than 1/8 inch in height for a label of more than five square inches but less than 25 square inches.
- Not less than 3/16 inch in height for a label more than 25 square inches.
To convert ounces to grams multiply by 28.4 and round off to grams. To convert pounds to grams multiply by 454.
Information Panel
The information panel must include the name and place of business, all ingredients and, when applicable, nutrition information.
A complete list of ingredients, if other than honey, including standardized food products, must be on the label in order of predominance by weight if there are two or more ingredients. All artificial colors must be specifically listed. Include the business name, and address (including zip code) on the label.
If health or nutritional claims are made on a food label, the product is subject to special nutritional labeling.
General Information
All labeling must be truthful and accurate. Food standards must not be violated.
The U.S. Grade is voluntary on honey labels and is offered as a fee for service by the U.S. Department of Agriculture Agricultural Marketing Service. Grade is primarily assessing the moisture and color. Grade A = 18.6 percent moisture and freedom from defects (no foreign material) if filtered. If a Grade is used, the Grade must be accurate and must declare the country of origin.
Although not required by regulation, a warning statement is common on honey indicating “Do not feed to infants under one year of age” due to naturally occurring Clostridium botulinum spores present in some honey which can be fatal for some infants as they cannot adequately digest it.
Many products have exemptions or further requirements to the above label regulations.
These instructions apply to liquid and comb honey only, not processed honey, which has all the requirements of processed food.
Principal Display Panel
The principal display panel must be large enough to clearly accommodate all required label information without crowding or obscuring designs. All information on the label must be prominent and conspicuous, but in no case may the letters and numbers be less than 1/16 inch high.
Product identity must be on the label, i.e., honey. The declaration of the floral source of honey on the label is not required. However, the name of the plant or blossom can be included if the information to support the conclusion that the plant or blossom designated on the label is the main floral source of the honey. Names such as “Clover Honey” or “Wildflower Honey” are acceptable.
The net quantity of contents must be expressed in terms of weight or measure. This declaration of contents must be expressed both in ounces and full unit if one to four pounds, or one pint to one gallon. The metric equivalent is sometimes required. The declaration must be in the lower one-third of the label separated from all other print. If the weight is more than one pound, fractions of a pound are expressed as a decimal, e.g., 1 1/2 pounds is 1.5 lb. The declaration must be in letters and numbers in a type and size relative to the area of the label panel of the package as follows:
- Not less than 1/16 inch in height for a label of five square inches or less.
- Not less than 1/8 inch in height for a label of more than five square inches but less than 25 square inches.
- Not less than 3/16 inch in height for a label more than 25 square inches.
To convert ounces to grams multiply by 28.4 and round off to grams. To convert pounds to grams multiply by 454.
Information Panel
The information panel must include the name and place of business, all ingredients and, when applicable, nutrition information.
A complete list of ingredients, if other than honey, including standardized food products, must be on the label in order of predominance by weight if there are two or more ingredients. All artificial colors must be specifically listed. Include the business name, and address (including zip code) on the label.
If health or nutritional claims are made on a food label, the product is subject to special nutritional labeling.
General Information
All labeling must be truthful and accurate. Food standards must not be violated.
The U.S. Grade is voluntary on honey labels and is offered as a fee for service by the U.S. Department of Agriculture Agricultural Marketing Service. Grade is primarily assessing the moisture and color. Grade A = 18.6 percent moisture and freedom from defects (no foreign material) if filtered. If a Grade is used, the Grade must be accurate and must declare the country of origin.
Although not required by regulation, a warning statement is common on honey indicating “Do not feed to infants under one year of age” due to naturally occurring Clostridium botulinum spores present in some honey which can be fatal for some infants as they cannot adequately digest it.
Many products have exemptions or further requirements to the above label regulations.
These instructions apply to pure maple syrup only.
Principal Display Panel
The principal display panel must be large enough to clearly accommodate all required label information without crowding or obscuring designs. All information on the label must be prominent and conspicuous, but in no case may the letters and numbers be less than 1/16 inch high.
Product identity must be on the label, i.e., maple syrup. The net quantity of contents must be expressed in terms of weight or measure. This declaration of contents must be expressed both in ounces and full unit if one to four pounds, or one pint to one gallon. The metric equivalent is sometimes required. The declaration must be in the lower one-third of the label separated from all other print. If the weight is more than one pound, fractions of a pound are expressed as a decimal, e.g., 1 1/2 pounds is 1.5 lb. The declaration must be in letters and numbers in a type and size relative to the area of the label panel of the package as follows:
- Not less than 1/16 inch in height for a label of five square inches or less.
- Not less than 1/8 inch in height for a label of more than five square inches but less than 25 square inches.
- Not less than 3/16 inch in height for a label more than 25 square inches.
To convert ounces to grams multiply by 28.4 and round off to grams. To convert pounds to grams multiply by 454.
Information Panel
The information panel must include the name and place of business, all ingredients and, when applicable, nutrition information.
Include the business name, and address (including zip code) on the label.
A complete list of ingredients, if other than maple syrup, must be on the label in order of predominance by weight if there are two or more ingredients. All artificial colors must be specifically listed. De-foaming agents may be used as a processing aid during manufacture. The de-foaming agents, when used properly in that they are used in insignificant quantities and having no function in the finished maple syrup, do not need to be declared in the ingredient list. The addition of sweeteners or other substances to the syrup no longer meets the standard of identify for pure maple syrup and cannot be labeled as such.
If health or nutritional claims are made on a food label, the product is subject to special nutritional labeling.
General Information
All labeling must be truthful and accurate. Food standards must not be violated.
The U.S. Grade is voluntary on maple syrup labels and is offered as a fee for service by the U.S. Department of Agriculture Agricultural Marketing Service. The grading system references the color, taste, and percent solids. For more information, visit the USDA’s Maple Syrup Grades and Standards webpage.
Many products have exemptions or further requirements to the above label regulations.
These instructions apply to pure maple syrup only.
Principal Display Panel
The principal display panel must be large enough to clearly accommodate all required label information without crowding or obscuring designs. All information on the label must be prominent and conspicuous, but in no case may the letters and numbers be less than 1/16 inch high.
Product identity must be on the label, i.e., maple syrup. The net quantity of contents must be expressed in terms of weight or measure. This declaration of contents must be expressed both in ounces and full unit if one to four pounds, or one pint to one gallon. The metric equivalent is sometimes required. The declaration must be in the lower one-third of the label separated from all other print. If the weight is more than one pound, fractions of a pound are expressed as a decimal, e.g., 1 1/2 pounds is 1.5 lb. The declaration must be in letters and numbers in a type and size relative to the area of the label panel of the package as follows:
- Not less than 1/16 inch in height for a label of five square inches or less.
- Not less than 1/8 inch in height for a label of more than five square inches but less than 25 square inches.
- Not less than 3/16 inch in height for a label more than 25 square inches.
To convert ounces to grams multiply by 28.4 and round off to grams. To convert pounds to grams multiply by 454.
Information Panel
The information panel must include the name and place of business, all ingredients and, when applicable, nutrition information.
Include the business name, and address (including zip code) on the label.
A complete list of ingredients, if other than maple syrup, must be on the label in order of predominance by weight if there are two or more ingredients. All artificial colors must be specifically listed. De-foaming agents may be used as a processing aid during manufacture. The de-foaming agents, when used properly in that they are used in insignificant quantities and having no function in the finished maple syrup, do not need to be declared in the ingredient list. The addition of sweeteners or other substances to the syrup no longer meets the standard of identify for pure maple syrup and cannot be labeled as such.
If health or nutritional claims are made on a food label, the product is subject to special nutritional labeling.
General Information
All labeling must be truthful and accurate. Food standards must not be violated.
The U.S. Grade is voluntary on maple syrup labels and is offered as a fee for service by the U.S. Department of Agriculture Agricultural Marketing Service. The grading system references the color, taste, and percent solids. For more information, visit the USDA’s Maple Syrup Grades and Standards webpage.
Many products have exemptions or further requirements to the above label regulations.